In the previous generations, most shops and garages were closed by handmade steel bar doors or corrugated sheet doors. After ROLL FORMING MACHINE comes up to produce door shutter, all doors are changed to shutter slats. It has so many advantages from old style doors. That here, we explain some good point of Roll-up Shutter Door.
Shutter Door Repairs
- shutter door producing is more fast and easy by shutter roll forming machine; with any rolling shutter door details, shutter roll forming machine can produce within 10 minutes.
- Installation for metal shutter door is faster and easy than old doors. Shutter and shutter joined together, and make various height for any Garage Shutter Doors.
- For using: open and close doors, it’s so fast and convinces with roll-up shutter door with tubular motor;
Shutter Door Repairs just check the shutter one by one, only need to change the damaged shutter, not necessary for whole doors replacement.
- Not limited with listed advantages, but more benefit will be discovered during daily usage of ROLLING SHUTTER DOORS.
Different types of Door Shutters:
In LOTOSFORMING MANUFACTURE, we mostly do door shutter design based on customer’s requirement, and shutter joint safety standard. But here, we wanna explain some global well-recognized door shutters:
- Perforated Roller Shutter: it’s applied punch before forming step;
- PolyurethaneFoamed Door Shutter: it’s applied PU Foam inside of shutter, it’s good for Fire-Proof and Sound-Proof. Less noise during rolling up and down;
- Single Layer Rolling Shutter Door: in different door shutter design, such as shutter width and shutter section drawing.
Roller Shutter Doors producing:
All steel roller shutter is produced by Shutter Door Roll Forming Machine. In LOTOSFORMING, we use several types of rolling shutter machines based on shutter drawing.
- Chain Transmission Rolling Shutter Machine;
- Gearbox Transmission PU FOAMED Door Shutter Roll Forming Machine.
Up to Door Shutter Design, LOTOSFORMING engineers design proper rollers and forming steps according to shutter design.
Roller Shutter Doors Manufactures
should have a long history on design and produce rolling shutter machines to satisfy the standard requirement for final Foamed Shutters.
LOTOSFORMING ROLL FORMING Machine Manufacture has more than 50-year remarkable experience on Rolling Shutter Making Machine.
Shutter Patti Machine is including decoiler, forming stations, hydraulic cutting unit, and PLC control system, and finished output table.
For Rolling Shutter Raw Material, different material could be applied, such as aluminum, galvanized(GI), color coated steel (PPGI) and PVC coated steel, and stainless steel (S.S) and so on.
Mostly, Shutter Door Roll Forming Machine, LOTOSFORMING install lubrication oil feeding device on the roll forming machine input, to mop the material with rollers to protect shutters material coated surface.
For any further question and inquiry, for shutter roll forming machine design and proposal, you may feel free to contract with LOTOSFORMING Roll Forming Machine Manufacture.